The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes.
It will fit directly to most routers.
Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.
Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.
Instructions for fitting
The line-up pin fits into the collet and is plunged through the router base.
The line-up bush is fitted into the Unibase and secured.
This is then placed over the line-up pin and rotated in order to line up the fixing holes.
The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes.
These range from 10mm up to 30mm (GB10 - GB32)
2 x Line-up pins
1 x Guide bush
1 x Fixing screw pack
Diameter 170 mm
Thickness 8 mm