Description
 |
 |
 |
 |
 |
 |
 |
 |
When it comes to heavy duty cleaning, irrigating the garden, pumping out a flooded basement or just general water pump applications, few can rival the power and performance of the GIANTZ 8hp 2-inch Twin Impeller Water Pump.
With an impressive 30,000l/h (500l/min) maximum flow rate and a massive head of 160m, the single cylinder 230cc 3600rpm 4-stroke air cooled gasoline engine can push water as high as four storeys without as much as a stutter. What’s more, the twin impeller design facilitates efficient water pumping by minimizing pump discharge loss. Full range pump performance is also enhanced with the suction entry on both sides of the impeller providing the necessary axial balance to achieve it. The three outlets design, one 50mm(2.0”) and two 40mm(1.5”), also allows for varied water uses and a convenient 3.6-litre fuel tank gets the pump running for up to four hours on a single full tank.
Other great features include an engine damage prevention low oil alert alarm that stops the engine when oil is insufficient, easy pull start, soft rubber feet to reduce shock and noise and a steel tubular frame that encloses the pump for easy carry. Not least, the water pump is leak-proof sealed and rust-resistant for long-lasting use.
Note: Minimal assembly required.
FEATURES
-
8hp high pressure water pump
-
Low oil alert function
-
160m-delivery height
-
Huge 500l/min maximum flow rate
-
Easy start-up pull system
-
Twin impeller design
-
Three-outlet design
-
Shock and noise absorbing rubber feet
-
Rust-resistant
-
Leak-proof sealed
-
Bonus alloy fittings for hose connection
SPECIFICATIONS
-
Brand: Giantz
-
Power Output: 8hp / 3600rpm
-
Displacement: 230cc
-
Engine Type: 1-Cylinder, 4-stroke, Air-cooled gasoline engine
-
Work capacity 163cm³
-
Ignition system: T.C.I (Non-contact transistor)
-
Starting system: Recoil
-
Fuel tank capacity: 3.6L
-
Engine oil system capacity: 0.6L
-
Water pump double impeller
-
Water pump Outlet: 2x40mm (1.5”) and 1x50mm (2”)
-
Maximum delivery lift: 160m
-
Suction height 8m Max.
-
Water displacement: 30m³/hr
PACKAGE CONTENTS
-
1 x High Pressure Pump
-
1 x Alloy Fittings
-
1 x Outlet Cover
-
4 x Rubber Feet
-
1 x Inlet Filter
-
1 x Hose Clamp
-
1 x User Manual
