Featuring 50mm (2") inlet/outlet and a class-leading flow rate of 30,000L/h (500L/min) with a total head of 50m, the hardworking Water Pump is coupled with a powerful 235cc, 3600rpm 4-stroke engine that easily transfers water up to four storey high with minimum fuss.
With the Water Pump's centrifugal pump and superior impeller design, pump discharge loss is reduced. The suction entry on both sides of the impeller provides an axial balance to the impeller, which offers full range pump performance linear to engine throttle.
The motor assembly is housed in an anti-corrosive tubular steel frame. Not least, ceramic and carbon seals offer great durability and long lasting use. A convenient sized 4.5L fuel tank means it can run for hours on a single fill (load dependent).
Other great features include a 100% duty cycle that's designed for continuous operation, an ultra-fine air filter, easy start pull system, shock-absorbing and noise-reducing rubber feet and bonus hose fittings and inlet filter for a hassle-free setup.
8hp high flow petrol water pump
Flow rate of 30,000 L/h (500L/min)
Anti-corrosive alloy pump housing
Ceramic and carbon seals
Full 50mm (2") inlet / outlet
Gearless direct drive
100% duty cycle
Easy start pulling system
Bonus hose fittings and inlet filter
Anti-shocking and noise-reducing rubber feet
Ultra-fine air filter
Engine type: 4-stroke, OHV, Air-cooled
Engine power: 8hp
Flowing volume: 30,000L/hour (500L/min)
Fuel capacity: 4.5L
Fuel type: Regular unleaded 95+ RON
Engine oil type: 10W-30/ 10W-40/ 15W-30/ 15W-40 non synthetic engine oil (not included in purchase)
Output size: 50mm (2")
Input size: 50mm (2")
Color: Black and Red
1 x Giantz Water Pump
2 x Hose Fitting
1 x Inlet Filter
1 x Assemble Tool
3 x Hose Clip
1 x User Manual