The Kincrome 1/2" Square Drive Digital Torque Adapter converts any standard 1/2" Square Drive ratchet into an accurate digital torque wrench.
Simply set the desired torque, plug in a ratchet and socket and tighten the fastener until the digital display and audible tone indicate you’ve reached your target torque.
You can also use it to calibrate an existing torque wrench.
Display modes include Peak, which displays and stores the max torque applied, and Trace, which shows real-time torque as it is applied.
Five torque units of measure are available: lb-ft, lb-in, kg-cm, kg-m and N-m.
Display Range: 40-200Nm (29.5 – 147.6 ft.lb)
Accuracy: + /- 1%
5 torque measurement settings(kg-cm kg-m lb-in lb-ft N-m)
Memory slots record last 50 torque value readings
Both peak and trace settings
Use as a calibration device for existing torque wrenches digital and analogue
3 colour LED light indicator and progressive audio notification when reaching specified torque
Convert any Ratchet into a Torque Wrench
Use as a Calibration Device
Works in both directions on left and right hand threads
Measurements 70 x 40 x 50MM
Range 40-200NM (29.5 – 147.6 FT-LB)
Accuracy + /- 1% of setting